Architect Tools

Generate Buildings（Generate Buildings）
Building blocks are generated based on the imported CAD plot plan.

Merge Solid Buildings（Merge Solid Buildings）
Merge the resulting solid building blocks.

Fill Solid Holes（Fill Solid Holes）
Try filling openings in solids, such as windows in walls.

Select Non-Solids（Select Non-Solids）
Filter and select non solid groups and components in the selection set.

Make 2:1 Road Profile（Make 2:1 Road Profile）
Generates a 2:1 corridor profile triangle at both ends of the segment.

Move to Z（Move to Z）
You can move the selected boundary to the z-axis height you set, which can be used to process contour lines, etc.

Contour Tool（Contour Tool）
You can work with unclosed contours in imported CAD to make them completely closed.

Extrude Up（Extrude Up）
First, prepare the contour lines of the processed elevation, select a group of closed faces based on the contour projection, and extrude upward to the height of the contour line after executing the command.

Project Down Tool（Project Down Tool）
After executing the command, first select the target plane, then select the sideline to be projected (which can be inside the group or component), and then project it to the plane.

Magnet Tool（Magnet Tool）
Click the surface to be adjusted, and then click or drag the point to adjust its position, and adsorb it to the upper surface.

Move to Plane（Move to Plane）
Select the boundary line to determine the target plane, then select the plane to be adjusted, and press enter to confirm to align the plane.

Flatten Selection（Flatten Selection）
Flattens all selected geometric objects, including crowd and components, to a plane with a Z axis of 0.

Crop Selection to Boundary（Crop Selection to Boundary）
Select a group of sidelines containing the boundary to be trimmed, and a projection plane parallel to the ground. After executing the command, the sidelines in the group will be trimmed according to the outline of the projection plane.

Edge Grid Divide（Edge Grid Divide）
The edge line is divided according to the set mesh size.